PLC Series

Screw connect and pull break couplers

AKJia’s PLC Series screw connect couplers allow for connection under pressure and are ideal choice for snow removal applications with high pressure pulses.

Construction

  • Carbon steel with trivalent plating
  • Fitted with Nitrile seals (NBR)
Datasheet Inquiry

FEATURES

  • Screw connection only possible with both halves of PLC Series
  • Screw connect design eliminates brinelling
  • Can be connected with residual pressure in the system
  • Bidirectional flow

APPLICATIONS

  • Snow removal
  • Agricultural
  • General industrial
  • Mobile equipment

Dimensions

Available Seals and Temperature Range

All carbon steel products have Nitrile Butadiene Rubber (NBR) seals fitted as standard. All stainless steel products have Fluoro-elastomer Rubber (Viton®) (FKM) seals fitted as standard. Special seal materials are available on request.

Abbreviation Trade Name Chemical Name Min. Temp Max. Temp
NBR, XNBR Chemigum®,  Hycar8,  Breon®,  Butakon®, Butacril®, Buna-N®, Perbunan®, Paracril®, Krynac®, Europrene-N®, Nipol® Nitrile Butadiene Rubber
Carboxylated Nitrile Rubber		 -40ºC (-40ºF) 106ºC (223ºF)
FKM(FPM) Dai-el®, Fluorel®, Tecnoflon®, Viton® Fluoro-elastomer Rubber -20ºC (-4ºF) 200ºC (392ºF)
EPR, EPDM Buna-AP®, Dufral®, Epsyn®, Nordel®, Epcar8, Keltan®, Royalene®, Polysar-EPDM® Ethylene Propylene Copolymer
Ethylene Propylene Terpolymer		 -50ºC (-58ºF) 120ºC (248ºF)
FVMQ Silastic 1S®, FSE® Fluorosilicone Rubber -65ºC (-85ºF) 170ºC (338ºF)
FFKM Perlast®, Kalrez®, Chemraz®, Kaflon® Perfluoroelastomer -25ºC (-13ºF) 300ºC (572ºF)