TC Series
Screw connect tipper couplers Tipper Truck Quick Coupling
AKJia’s TC Series screw connect tipper couplers are designed for use on tipper trucks. The female coupler has a wing nut sleeve which enables operators to connect the couplers by hand, even when there is low residual pressure in the line.
Construction
- Carbon steel with trivalent plating
- Fitted with Nitrile seals
FEATURES
- Screw connect design eliminates brinelling
- Wing nut sleeve design allows connection by hand
- Can be connected with up to 50 bar residual pressure in the hydraulic circuit
- Bidirectional flow
- Male has external thread for bulkhead mounting
APPLICATIONS
- Tipper trucks
- Commercial vehicle trailers, agricultural equipment and construction plant
- Mobile plant
Dimensions
TC Series Wing nut quick coupling are usually used in Tipper trucks, wet-line kits, trailer coupler etc.
Available Seals and Temperature Range
All carbon steel products have Nitrile Butadiene Rubber (NBR) seals fitted as standard. All stainless steel products have Fluoro-elastomer Rubber (Viton®) (FKM) seals fitted as standard. Special seal materials are available on request.
Abbreviation | Trade Name | Chemical Name | Min. Temp | Max. Temp |
---|---|---|---|---|
NBR, XNBR | Chemigum®, Hycar8, Breon®, Butakon®, Butacril®, Buna-N®, Perbunan®, Paracril®, Krynac®, Europrene-N®, Nipol® | Nitrile Butadiene Rubber Carboxylated Nitrile Rubber |
-40ºC (-40ºF) | 106ºC (223ºF) |
FKM(FPM) | Dai-el®, Fluorel®, Tecnoflon®, Viton® | Fluoro-elastomer Rubber | -20ºC (-4ºF) | 200ºC (392ºF) |
EPR, EPDM | Buna-AP®, Dufral®, Epsyn®, Nordel®, Epcar8, Keltan®, Royalene®, Polysar-EPDM® | Ethylene Propylene Copolymer Ethylene Propylene Terpolymer |
-50ºC (-58ºF) | 120ºC (248ºF) |
FVMQ | Silastic 1S®, FSE® | Fluorosilicone Rubber | -65ºC (-85ºF) | 170ºC (338ºF) |
FFKM | Perlast®, Kalrez®, Chemraz®, Kaflon® | Perfluoroelastomer | -25ºC (-13ºF) | 300ºC (572ºF) |